Stainless steel thick film heating technology originated from Europe and the United States, it uses screen printing technology to print layers on base material, these layers are insulation medium, resistance, conductor, protective glaze etc., high temperature sintering is employed to form a dense layer of microcrystalline glass film, not easy to fall off, not easily scratched.

　　Product features  

　　GIDAPE® stainless steel thick film heating tube has the following characteristics:

　　1, Safe and durable high strength: stainless steel substrate, multi-layer microcrystalline vitreous insulation.

　　2, Fast heating: heating circuit has temperature rise over 80~150 degrees per second.

　　3, High utilization rate of heat: directly rapid-heat stainless steel tube, a big heat exchange area, fast replacement, efficiency up to above 98%.

　　4, Green and environmental protection: pure resistive load, no electromagnetic radiation, good for human body and mind.

　　Product parameters

　　According to the special application for vehicle, we recommend the diameter of the heater from Φ30 to 75mm, and the maximum power is 16kw. The detail information is as below.

　　Product use precautions

　　1, The product temperature rising rate is greater than 80 ℃~150℃/S, so, please ensure that the tube is filled with fluid before use.

　　2, The pipe must be installed vertically when heating liquid, the direction of liquid flow is from the bottom up. To avoid local dry burning, please add water at first, and then connect to power.

　　3, Based on different powers, the user should ensure the minimum flow, while ensuring smooth water access to the pipe, to avoid vaporization and dry burning.

　　4, Pay attention to the surface heat dissipation; and due to a big power density, please also pay attention to the rate of heat exchange.